TZ600A Professional Amplifier

Equipped with a 2.4-inch TFT color screen, it displays real-time gain/temperature/mode

Home page

Product Detail

Characteristics:

Equipped with a 2.4-inch TFT color screen, it displays real-time gain/temperature/mode, and the usage status is clear at a glance

Reasonable optimization of structure, high signal-to-noise ratio, extremely quiet, suitable for high specification conference design requirements

● Start up with high wind speed and dust removal for 3 seconds to reduce the erosion and short circuit/open circuit damage of electronic components caused by dust accumulation

Designed with less than 0.5% distortion, the sound is natural and realistic, with voltage limit/short circuit/DC/overload/overheating

Adopting a silent fan, it is quiet and low-noise, suitable for high standard design requirements in computer rooms.

Stereo mode (2/4 channel drive)	2 channels
8Ω/FTC20HZ-20KHZ/0.1%THD	600W
4Ω/FTC20HZ-20KHZ/0.1%THD	1000W
Bridge mode (1/2 channel drive)

Average continuous output power	2 channels
8Ω/FTC20HZ-20KHZ/0.1%THD	1200W
4Ω/FTC20HZ-20KHZ/0.1%THD	2000W

Signal to noise ratio	（20HZ-20KHZ)8Ω	98DB
Distortion	(@8Ω 1KHZ)	<0.5%
Input impedance		20KΩ
frequency response		35HZ-20KHZ
output circuit		CLASS H
Damping coefficient		>600@8Ω
Cooling method	2 continuous fans, airflow is drawn out from back to front
Wiring Breaks (per channel)	Input end: XLR pin, output terminal: two core XLR, strip terminal
Control	Front panel: AC power switch, separate gain control for channel 1/2, rear panel: stereo /Parallel/bridge modulation, sensitivity adjustment, compression switch, frequency division adjustment
Indicator light	Normal: ACTION (red), signal: SIGNAL (green), overload protection: PROTECT (Orange), Distortion: CLIP (Red)
Power amplifier protection	Equipped with output short circuit, overheating, automatic amplitude limiting, long-term output power, DC/AC protection device
Dimensions (width x depth x height)	483mmx405mmx90mm (2 channels)
Weight	19KG
Power requirements	220V